Liner Hanger , a device used to attach or hang a liner from the internal wall of a previously set casing string. Conventional liner hangers are “hung” (connected to the last casing) by setting slips that grip against the inner wall of the previously set casing string. Expandable liner hangers are hung by [...]
Liner hanger with rubber packer and Gravel pack crossover tool : The gravel pack crossover tool creates the various circulating paths for fluid flow during gravel packing. The package includes two different string runs in the well as illustrated in Fig (1) and Fig (2). The first string run as shown in Fig (1) include [...]
RMS Manufacture Primary Cementing Equipment and Casing Accessories for All Sizes. RMS’s Products Are Designed, Manufactured, Tested and Inspected in Our Manufacturing Facility. Float shoe and collar facilitates getting the casing to total depth and prevents cement placed in the annulus from flowing back into the casing. It also provides a landing point for casing wiper [...]
Casing centralizer is a mechanical device secured around the casing at various locations to keep the casing from contacting the wellbore walls. As a result of casing centralization, a continuous annular clearance around the casing allows the cement to completely seal the casing to the borehole wall. Centralization: * Standard bow centralizer. * Cement Basket. [...]
Heavy duty clamp is used to suspend the casing/ screen joint on rig floor or may be supported at the ground surface by beams during the well casing and screen run in hole. The purpose of suspending the casing and screen is to ensure the screen is held in tension during weld construction or makeup [...]
Roscoe Moss Sahara RMS is engaged in supplying and manufacturing flanges,threaded connection and pipe fittings. RMS is fully equipped with five lathe machines, ring rollingmachine, hydraulic press machine and fourteen drilling machines for the making of flanges at maximum diameter of 1800 MM (70 inch) with different classes and standards, RMS also cut APIthread different [...]
Electro-galvanic corrosion can occur between dissimilar metals (i.e. carbon steel to stainless steel). When joined together, an electronic reaction occurs between the two, corroding the less noble metal at an accelerated rate. This coupling is used to connect dissimilar metals, thereby mitigating the risk of electro-galvanic corrosion.
The Rossum Sand Tester is used to measure sand content of pumped water. This device is reliable, easy to use and relatively inexpensive. American Water Works Association Standard for Water Wells (AWWA A 100) Appendix E, Section E.4.6 "Measurement of Sand Content" states "Measurement of sand content may be accomplished by the installation of the [...]